Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Tempe, AZ
Chimney inspection in Tempe is where most of our work starts, because the desert makes chimneys fail in ways that wetter climates don’t. Most of the housing here went up between the 1950s and the 1970s, with brick fireplaces built for ambiance rather than heat, and clay tile flues that in many cases have never been relined. Add months of 105°F-plus heat, a monsoon season that drives dust and rain into uncapped flues, and long idle stretches between fires, and a chimney that looks fine from the curb can be holding cracked tile or glazed creosote. Call (866) 827-7102 and we’ll tell you what your chimney actually needs.
Why Tempe Homes Are Different
Tempe’s housing stock is the first thing that changes how we work. Post-WWII ranch homes and 1960s-70s tract housing dominate, and many of those fireplaces were built for show, not output. The clay tile flues behind them have been sitting for decades without a liner, and the brick fireboxes take a beating from our temperature swings.
The climate does the rest. Summer highs routinely run above 105°F and months pass without rain, so chimneys sit idle and whatever creosote is inside gets baked on. Then the monsoon arrives from July through September with wind-driven dust and rain that blow straight into uncapped flues. The drying heat that follows turns creosote into a hard, glossy glaze that’s far more stubborn than what crews deal with in wetter parts of the country.
Near the ASU campus, rental stock adds another layer: chimneys that go years without inspection because a landlord assumes a desert city doesn’t need one. Technicians routinely pull pack-rat nests of sticks and cactus spines out of flues in those older neighborhoods.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Tempe Services
Two services account for most of the calls we get from Tempe homeowners: cleaning out the flue, and fixing what cleaning reveals.
Chimney Sweep in Tempe
A sweep here is rarely just soot. On a 1960s ranch home with a decorative brick fireplace, we’re removing the creosote from occasional winter fires mixed with dust and desert debris that’s settled in over the idle months. Because the heat bakes creosote into glaze, some Tempe flues need more mechanical work than a light brushing. We also confirm the damper and firebox are sound while we’re in there. For a wood-burning fireplace or insert, book a Chimney Sweep in Tempe and we’ll clear the flue and leave you with a clear picture of what we found.

Chimney Repair in Tempe
Repair in Tempe usually means one of three things: a cracked flue tile, a cap that’s been beaten up by monsoon wind, or a firebox whose mortar has opened up. Because we handle resurfacing and relining with purpose-built components rather than improvised hardware, we can address the cause instead of patching the symptom. When a sweep turns up damage, the repair is quoted and handled by the same team. If your inspection flagged something, start with Chimney Repair in Tempe.

Chimney Inspection in Tempe
Inspection matters more in Tempe than in most places because so much of the housing was built before liners were standard and because the dry heat hides deterioration until it’s advanced. A visual sweep alone can’t tell you whether a clay tile flue is cracked behind the creosote, or whether the pack-rat nest you smell in August has blocked the flue. Our Chimney Inspection produces a documented condition assessment, so you know exactly what’s safe, what needs repair now, and what can wait.
Fireplace Inspection
Signs you need it
You’ve moved into an older Tempe home with an unknown chimney history, or the firebox mortar looks crumbly, the damper sticks, or smoke drifts into the room instead of up the flue.
What it costs in Tempe
Expect a typical range of $99 to $250, with more involved assessments at the higher end; the written estimate sets the final price.
How we do it
We examine the firebox, damper, smoke chamber and flue from the fire side, check clearances and cap condition, and photograph what we find for your record.
Chimney Flue Inspection
Signs you need it
Heavy glazed creosote, a flue that’s never been relined, or a smell of animal debris in the summer are all reasons to look inside the flue itself.
What it costs in Tempe
A flue-specific inspection typically runs $150 to $350 depending on access and whether the flue needs cleaning first.
How we do it
We run a camera down the flue to check for cracked tiles, gaps at the joints, and blockages from nests or debris, then document the condition tile by tile.
What Chimney Inspection Costs in Tempe
Inspection pricing depends on what we can see from the firebox versus what needs camera work in the flue. These are typical ranges, and the written estimate confirms the final cost before any work starts.
| Item | Typical range in Tempe |
|---|---|
| Standard fireplace and flue inspection | $99 – $250 |
| Flue camera inspection | $150 – $350 |
| Inspection combined with a sweep | $180 – $400 |
Do I really need an inspection if the chimney looks fine?
Yes, because appearance tells you almost nothing about the inside of a Tempe flue. Cracked clay tiles and heavy creosote glaze are hidden behind the firebox, and only a camera view reveals them. Call (866) 827-7102 for an exact quote – estimates are free.
How often should a Tempe chimney be inspected?
Once a year is the standard, and it matters here even if you burn only a few times each winter. Months of idle heat and monsoon debris can change a flue’s condition faster than occasional use would suggest. Call (866) 827-7102 to book yours.
Brands We Service in Tempe
Our repair materials come from recognized professional chimney brands: DuraFlex for flexible liner systems, HeatShield for flue resurfacing, and Gelco and Olympia Chimney for caps and accessories. That means a fix is specified for the application, not improvised from hardware-store parts. See our brands for the full picture. Turnaround on most repair work is quoted with the estimate.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Tempe, AZ
Every price below is a typical range, not a quote. The written estimate you receive sets the final price, and we confirm it before booking.
| Service | Typical range in Tempe |
|---|---|
| Standard fireplace and flue inspection | $99 – $250 |
| Flue camera inspection | $150 – $350 |
| Inspection combined with a sweep | $180 – $400 |
| Chimney sweep (standard) | $129 – $299 |
| Heavy creosote or glazed flue cleaning | $250 – $500 |
| Chimney cap installation | $150 – $450 |
| Flue resurfacing (HeatShield) | $1,200 – $2,800 |
| Partial liner replacement (DuraFlex) | $1,800 – $3,500 |
| Full chimney reline | $3,000 – $6,000 |
| Firebox and mortar repair | $400 – $1,500 |
Two things push price up in Tempe: glazed creosote from baked-on buildup that takes more mechanical effort to remove, and unlined or cracked flues that need resurfacing or relining rather than a simple clean. We agree the flat price before booking and put it in writing.
Neighborhoods We Serve in Tempe
We work across Tempe, from the older blocks near the ASU campus where pack-rat nests and unlined flues turn up on routine cleanings, to the ranch homes and tract housing out toward the city’s edges. Because the work is scheduled rather than dispatched by proximity, most jobs in Tempe are booked into the next available opening, Sunday through Friday, 7am to 7pm. We answer 24/7.
- Downtown Tempe and the Maple-Ash area
- The neighborhoods around ASU
- Warner Ranch
- Kiwanis Park area
- South Tempe near the Kyrene corridor
Service Area – Cities Near Tempe
Tempe sits in the middle of the East Valley, and we take chimney work in the surrounding cities as well. If you’re just outside Tempe, we can usually schedule you the same way. Neighboring areas we cover include Chandler, AZ, Mesa, AZ, Phoenix, AZ and Gilbert, AZ. Call (866) 827-7102 to confirm coverage for your address. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday.
Serving Tempe, AZ – Our Local Coverage Area
We serve Tempe and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Tempe
Most Tempe jobs are booked into the next available opening rather than same-hour dispatch. Call (866) 827-7102 and we’ll give you the soonest slot; fast dispatch runs 7am to 7pm, Sunday through Friday, and we answer 24/7.
Relining and structural repair often require a permit, and some HOAs have rules about exterior caps and visible changes. We confirm what applies to your address before work begins and build it into the written estimate.
We cover all of Tempe, from downtown and the ASU-area neighborhoods through Warner Ranch and South Tempe. Addresses just outside the city, including Chandler, Mesa, Phoenix and Gilbert, can usually be scheduled too. Call (866) 827-7102 to confirm your address.
Whether your fireplace has sat unused for years or you’ve just been told your flue needs attention, the next step is a real assessment of what’s actually there. We work with DuraFlex liner systems and HeatShield resurfacing, so a problem found during inspection can be quoted and repaired by the same team. Call (866) 827-7102 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Tempe Customers Say
"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Brooke Meyer"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Greg Hayes"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Bethany Gallagher