Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Repair for Tempe Homeowners
When a sweep or an inspection turns up a cracked crown, a rusted cap, or a flue that’s lost its lining, you need someone who can fix it, not just report it. That’s the gap we close. Our technicians have up to 9 years of experience, and we handle the full arc of chimney work in Tempe: sweep, inspection, and repair, so a problem found during cleaning gets quoted and fixed by the same team instead of a second contractor. We work with professional-grade components from HeatShield, DuraFlex, Gelco, Olympia Chimney, Famco, and Copperfield rather than improvised hardware-store substitutes. Estimates are free and the price is set per job by the written estimate. Call (866) 827-7102. We answer 24/7.
Chimney Cap Installation
Chimney Cap Installation is the fitting of a purpose-built cover over the flue opening that keeps rain, birds, and debris out while letting smoke escape. You need it when a flue is open to the sky, when a store-bought cap has rusted through, or when a new liner goes in and needs a properly sized cap above it. In Tempe, a monsoon downpour driven sideways can push water straight down an uncapped flue, and birds nest in open chimneys more often than homeowners expect. We specify caps from Gelco, Famco, and Olympia Chimney product lines, matched to the flue size. Typical installation runs $150-$450 depending on flue count and cap style, and the written estimate sets the final price. Call (866) 827-7102 for an exact quote; estimates are free.
Single-Flue and Multi-Flue Caps
A single-flue cap is the common case and the simplest fit. Multi-flue chimneys need a cap sized to cover every opening without blocking draft, which is why we measure rather than guess.
Animal Guards and Spark Screens
Stainless mesh screens keep birds and squirrels out while still passing smoke. We match the mesh gauge to your fuel type so creosote doesn’t clog the screen.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Cap Replacement
Chimney Cap Replacement is the removal of a failed cap and the fitting of a new one in its place, and it’s the repair we see called for most often after a windstorm. Caps fail when the metal rusts through, when a leg pulls loose from the crown, or when a flimsy store-bought unit warps and no longer sheds water. A cap that’s come loose can also tear at the crown as it moves, which turns a small job into masonry work. We pull the old cap, check the flue top and crown underneath, and fit a replacement from the Gelco, Famco, or Olympia Chimney lines sized to the opening. Typical replacement runs $150-$400 depending on cap style and whether the crown needs minor attention first. Call (866) 827-7102 for an exact quote; estimates are free.
When Rust Means Replace, Not Repair
Surface rust can be cleaned and watched. Through-rust, a hole, or a cap that flexes under hand pressure means replacement, because a compromised cap stops shedding water where it matters.
Matching the Cap to the Flue
An oversized cap can interfere with draft, and an undersized one leaves the flue edge exposed. We size to the actual opening and the liner type.
Chimney Liner Installation
Chimney Liner Installation is the fitting of a new flue lining, either as a full reline or a partial repair, and it’s the repair tier that goes well beyond surface cleaning. You need it when the existing clay tiles are cracked or missing, when gaps in the mortar joints let heat reach the surrounding structure, or when the flue was never lined to begin with, which happens in older Tempe homes more often than people realize. We install DuraFlex flexible liner systems, sized and insulated for your appliance. Where the masonry is sound enough, HeatShield resurfacing can restore the flue without a full liner replacement, which is a real cost-saving option most basic sweep companies can’t offer. Typical liner work runs $2,500-$6,500 depending on height, liner type, and whether resurfacing is an option. Call (866) 827-7102 for an exact quote; estimates are free.
Relining a Flue Safely
A compromised flue is a safety issue, not a cosmetic one, because heat and gases can reach materials that were never meant to take them. We don’t recommend relining without camera evidence you can see for yourself.
HeatShield Resurfacing as an Alternative
HeatShield bonds to the existing masonry flue and restores structural integrity without a full teardown. When the flue qualifies, it can save you the cost of a complete liner job.
Chimney Flashing Repair
Chimney Flashing Repair is the correction of the metal sealing where the chimney meets the roof, and it’s the fix that stops the leaks that get blamed on the flue. Flashing fails when the metal lifts, when the sealant dries and cracks in the Arizona sun, or when the roof covering pulls away from the chimney at the joint. The tell is a water stain on the ceiling near the chimney after rain, or rust streaks down the exterior masonry. We reset or replace the flashing, rework the counter-flashing into the masonry, and seal the joint properly rather than smearing more caulk over a failed edge. Typical flashing repair runs $300-$900 depending on roof pitch, access, and how much of the metal needs replacing. Call (866) 827-7102 for an exact quote; estimates are free.
Chasing a Leak to Its Source
Leaks near a chimney come from the flashing, the crown, or the cap, and guessing wastes money. We check all three before quoting anything.
Why Sealant Alone Doesn’t Hold
A bead of caulk over a lifted flashing edge buys a season at most. Proper flashing sheds water mechanically, so the seal isn’t the only thing keeping it out.
Chimney Crown Repair
Chimney Crown Repair is the fixing of the concrete or mortar cap on top of the chimney that sheds water away from the flue and masonry. The crown cracks over time from sun and heat cycling, and once it does, water runs down into the chimney body, soaking the masonry and finding its way to the flue tiles. You’ll often see a chunk of concrete on the roof or a crack running from the flue to the edge. We repair or rebuild the crown with the correct slope and overhang so water leaves the chimney instead of entering it, and we’ll tell you plainly when a crack can be sealed and watched rather than rebuilt. Typical crown repair runs $350-$1,200 depending on size and whether the crown is patched or rebuilt. Call (866) 827-7102 for an exact quote; estimates are free.
Cracks That Can Wait
A hairline crack with no separation can often be sealed and monitored. We document it so you know what changed on the next inspection.
Rebuilding With the Right Slope
A flat or back-sloped crown holds water at the flue, which is the opposite of what it’s for. A rebuild corrects the pitch so it drains away from the opening.
Chimney Repair Companies
Chimney Repair Companies differ mostly in what they’re able to do once the problem is found, and that difference matters more than price. Some outfits clean and inspect but stop there, sending you to a mason for the crown and a roofer for the flashing. We handle sweep, inspection, and repair under one roof, so a finding turns into a quoted repair without a second visit from a different trade. That matters in Tempe, where older homes often carry unknown chimney history and a buyer or seller needs clear answers fast. Our repairs draw from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield, and nothing is recommended without camera evidence you can see. Repair pricing is quoted per job by the written estimate. Call (866) 827-7102 for an exact quote; estimates are free.
What a Full-Scope Company Offers
When one team inspects and repairs, the notes from the inspection become the repair plan without getting lost between contractors. It also means one point of accountability for the finished work.
Questions to Ask Before You Book
Ask what the company can actually repair in-house and which brands they specify. Ask whether the inspection includes photos and a written condition report you keep.
Chimney Masonry Repair
Chimney Masonry Repair is the fixing of the brick, block, and mortar that make up the chimney structure itself, and it covers everything from repointing joints to rebuilding a damaged section. In Tempe, the sun and summer heat are hard on exterior mortar, which dries and crumbles over time, and once joints open, water gets behind the brick and the damage accelerates. Look for crumbling mortar between courses, loose or spalling brick, or a white powdery bloom on the surface. We repoint and rebuild with mortar matched to the existing masonry, and we fix the water entry point rather than just the visible symptom, because patching brick without addressing the leak is wasted work. Typical masonry repair runs $500-$3,000 depending on the extent of the damage. Call (866) 827-7102 for an exact quote; estimates are free.
Repointing Versus Rebuilding
Repointing replaces failed mortar in the joints and preserves the brick. A rebuild is only for sections where the units themselves have lost integrity.
Stopping Water Before It Spreads
Masonry damage gets worse with every wet season unless the entry point is closed. We trace it to the crown, flashing, or cap and fix that first.
Brands We Service
We work with HeatShield for flue resurfacing. The product bonds to the existing masonry flue, and knowing where it holds and where it won’t is the difference between a lasting repair and a callback. We also fit DuraFlex flexible liner systems on relining jobs, sized and insulated for the appliance, because a liner that’s the wrong size for the flue changes how the chimney drafts.
Caps and covers come from Gelco, Famco, and Olympia Chimney product lines, chosen for the application rather than whatever’s on a shelf. Whether you have HeatShield resurfacing done, a DuraFlex liner installed, or a Gelco, Famco, or Olympia Chimney cap fitted, the components are engineered for chimney use. Whether you have HeatShield, DuraFlex, Gelco, Famco, Olympia Chimney, or Copperfield work in place or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Water stains on the ceiling or chimney breast. Staining after rain points to the flashing, crown, or cap, and the leak only widens the damage the longer it runs. It’s worth a look before the next storm.
- Crumbling mortar or loose brick. Soft, sandy mortar between courses means water is already getting behind the masonry. Repointing early is far less work than a rebuild.
- A cracked or flaking flue lining. Cracked tiles let heat reach the structure around the chimney. Don’t burn again until it’s been looked at by a trained professional.
- A cap that’s loose, rusted through, or missing. An open flue takes in rain and wildlife. A replacement cap is a small job that prevents larger ones.
- Strong smoke smell or draft problems. Smoke backing into the room can mean a blocked or damaged flue. Stop using the fireplace and have it checked.
Our Process, Step by Step
- 1
Book the visit. Call and we’ll set a time. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. We answer 24/7.
- 2
Sweep and inspect. We clean the flue and run a camera inspection, so we’re looking at the actual condition of the lining rather than guessing from the firebox.
- 3
Document what we find. You get a condition report with photos showing what’s safe, what needs repair now, and what can be monitored. Nothing is recommended without camera evidence you can see for yourself.
- 4
Quote the repair. We name the fix and the material, whether that’s a DuraFlex liner, HeatShield resurfacing, or a Gelco cap, and give you a written estimate. The price is set per job by that estimate.
- 5
Complete the work and confirm it. We finish the repair and check it, so you know the flue is sound before you burn again.
How Much Does Chimney Repair Cost in Tempe?
Chimney repair in Tempe typically runs $150-$6,500 depending on what’s wrong, and the range is wide because a cap and a full reline are very different jobs. A typical cap installation or replacement runs $150-$450. A typical crown repair runs $350-$1,200, and flashing repair runs $300-$900. Masonry repointing and repair runs $500-$3,000 depending on how much of the structure is affected. Liner work is the largest tier at $2,500-$6,500, and HeatShield resurfacing can sometimes bring that down when the flue qualifies. Those are estimates, not quotes; the written estimate sets the final price.
What moves the number: chimney height and roof access, how many flues are involved, whether the damage is surface-level or structural, and whether a repair can be done without a full teardown. A job quoted without a camera inspection is a guess, and guesses run high or miss the real problem.
The way to avoid overpaying is to insist on evidence. Ask to see the camera footage, ask what can safely wait, and ask which material is being specified and why. Our inspection produces a documented condition report so you know exactly what’s safe and what needs repair now. Call (866) 827-7102 for an exact quote; estimates are free.
Our Service Area Near Tempe
We work throughout Tempe and the surrounding East Valley, including Chandler, Gilbert, Mesa, Phoenix, Glendale, Scottsdale, Avondale, Ak-Chin Village, and Casa Grande. Scheduling is straightforward: we book a visit and confirm the window with you. If you’re outside Tempe, the same chimney repair and inspection service applies, and we’ll tell you honestly when a job in Gilbert or Scottsdale makes more sense to book alongside a sweep. Start with Tempe Chimney Sweep to see the full range of services.
Serving Tempe, AZ – Our Local Coverage Area
We serve Tempe and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Repair in Tempe
Chimney repair is any fix to the chimney’s structure or components beyond cleaning: the liner, crown, cap, flashing, or masonry. It’s what happens after an inspection finds something that a sweep alone can’t resolve. Repair can be as small as a new cap or as large as a full reline with a DuraFlex system. We quote each job from what the camera inspection actually shows, not from a checklist.
Most repairs take anywhere from a couple of hours to a full day, and liner jobs can run longer depending on chimney height and access. A cap replacement is quick; a crown rebuild or reline takes more time and sometimes a second visit for materials. We’ll give you a realistic time frame in the written estimate before any work starts. Call (866) 827-7102 for an exact quote; estimates are free.
Typical chimney repair in Tempe runs $150-$6,500 depending on the scope, with caps in the $150-$450 range, crown and flashing work in the $300-$1,200 range, masonry repair at $500-$3,000, and liner installation at $2,500-$6,500. The written estimate sets the final price, and HeatShield resurfacing can sometimes lower a liner job when the flue qualifies. Call (866) 827-7102 for an exact quote; estimates are free.
Yes. We work with professional-grade components from the full portfolio: DuraFlex liner systems, HeatShield flue resurfacing, and caps and accessories from Gelco, Olympia Chimney, Famco, and Copperfield. Naming the material matters because a generic substitute fails differently, and usually sooner. We’ll tell you which product fits your chimney and why.
Same-day service is often possible when the schedule allows, and we don’t promise it before we’ve looked at the calendar. We answer 24/7. Fast dispatch from 7am-7pm, Sunday through Friday, closed Saturday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Repair work carries a workmanship warranty that we’ll spell out in writing before you book, so you know what’s covered and for how long. Material warranties vary by product, and we’ll explain the terms for the specific liner, cap, or resurfacing plan specified for your chimney. If something isn’t right with our work, we want to hear about it and make it right.
Clear the area around the fireplace and hearth, and make sure we can reach the roof access point without obstacles. If you know the chimney’s history, such as a past leak or an old repair, tell us; it saves time. Move anything fragile away from the work area, and plan for someone to be home to review the findings. It also helps to know the last time the chimney was swept and inspected. Book your chimney repair or a chimney repair visit nearby when you’re ready.
Schedule Your Chimney Repair Service in Tempe Today
Don’t let a small chimney problem turn into a large one. Call (866) 827-7102 to book a Tempe visit: sweep, inspection, and repair handled by the same team, with documented findings and a written estimate before any work begins. We answer 24/7. Fast dispatch from 7am-7pm, Sunday through Friday, closed Saturday. Estimates are free and there’s no obligation. Call today, and learn more about chimney repair before you book.
Written by the team at Tempe Chimney Sweep.