Chimney Liner & Rebuild Cost in Tempe - Camera Evidence Before Any Quote

Liner and masonry work is where this trade gets a bad name, so nothing is quoted until you have seen the camera footage yourself. Then a written, itemized price with no scope creep.

✓ Licensed & Insured ✓ Written quotes ✓ Free estimates
Call (866) 827-7102

Call to schedule your free estimate

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Estimates 💲 Upfront Pricing · Free Estimates
Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate
Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (866) 827-7102

How Much Does Chimney Liner & Rebuild Cost in Tempe?

A chimney liner replacement in Tempe typically costs $2,400 to $6,800, and a partial rebuild of the chimney crown, cap or upper masonry usually runs $900 to $4,200. HeatShield flue resurfacing, which restores a deteriorating flue without a full reline, generally lands between $1,600 and $3,100. The written estimate you get after an inspection sets the final price, and that estimate is free.

What you pay depends on the flue’s condition, the liner material, how much masonry has to come out, and how far a technician has to go to reach the chimney on your roof. This guide breaks down real Tempe ranges line by line so you can compare a quote against something concrete instead of a shrug.

Key Takeaways

  • Full liner replacement in Tempe: typically $2,400 to $6,800, including the DuraFlex liner, insulation, cap and labor.
  • HeatShield resurfacing is often the lower-cost path at $1,600 to $3,100 when the flue is cracked but still structurally sound.
  • Chimney rebuilds (crown, cap, upper masonry) run $900 to $4,200 depending on how much brick and mortar has to be replaced.
  • Inspection first. It’s the step that tells you which of those tiers you actually need.
  • We answer 24/7 for scheduling. Fast dispatch from 7am to 7pm, Sunday through Friday.

Chimney Liner & Rebuild Cost Breakdown (2026)

Here’s how the work breaks down by line item for the Tempe market. Ranges reflect typical residential jobs with a wood-burning fireplace, insert or stove.

Line Item Typical Range What It Covers
Chimney inspection & documentation $0 to $350 Condition assessment of flue, crown, cap and firebox with a written report of what’s safe, what needs repair and what can be monitored
Chimney sweep (creosote removal) $150 to $320 Cleaning the flue, firebox and smoke chamber; removal of Stage 1 and Stage 2 creosote
HeatShield flue resurfacing $1,600 to $3,100 Resurfacing cracked or spalling flue tiles; bonds to existing masonry without a full teardown
Partial liner replacement (DuraFlex) $1,200 to $2,800 Replacing a damaged section of liner where the rest of the flue is sound
Full liner replacement (DuraFlex) $2,400 to $6,800 New flexible liner, insulation wrap, top plate, cap and connection to the appliance
Chimney cap replacement (Gelco, Olympia, Famco) $250 to $700 Purpose-built cap sized to the flue, with animal and weather screening
Crown repair or replacement $450 to $1,500 Cracked or crumbling crown rebuilt or resurfaced to shed water off the chimney top
Upper masonry rebuild (partial) $900 to $4,200 Rebuilding brick above the roofline where mortar joints or bricks have failed
Full chimney rebuild (above roof) $4,500 to $9,500 Complete teardown and rebuild of the chimney stack above the roof deck
Firebox or damper repair $400 to $1,200 Damper replacement, firebox mortar repair or smoke chamber work

What pushes the price up

Height and access matter more in Tempe than most homeowners expect. A two-story roofline, a steep pitch, or a chimney tucked behind a patio cover adds setup time and often scaffolding. Liner choice shifts the number too: a flexible DuraFlex liner sized for a wood insert costs more than a straight run for a basic open fireplace, because the appliance connection and insulation requirements differ.

Pre-existing damage is the other big driver. A flue with Stage 3 creosote and glazed tile requires more prep before any liner goes in. If the crown is cracked and water has been getting into the masonry, you may be looking at crown work plus liner work, not one or the other.

Want to talk it through?Free estimate, price agreed before work starts
Call (866) 827-7102

What keeps the price down

If the flue is cracked but the tiles are still bonded and structurally sound, HeatShield resurfacing often makes a full reline unnecessary. That’s a meaningful savings, and it’s an option a sweep-only company typically can’t offer because they don’t carry the material or the application capability. A partial liner replacement is also viable when the damage is isolated.

What Affects Chimney Liner & Rebuild Pricing in Tempe

  • Flue condition and creosote stage. CSIA classifies creosote in three stages. Stage 3 is a mandatory repair, not a recommendation, and it changes the scope from cleaning into liner or resurfacing work.
  • Liner material and system. DuraFlex flexible liner systems are purpose-built for relining, and sizing them to the appliance matters. A liner that’s too large for the flue or too small for the appliance is a do-over, so the measurement step is part of the cost.
  • Roof access and chimney height. Tempe homes range from single-story ranch layouts to two-story builds with tile roofs. Access difficulty adds labor, and it’s the single most common reason two quotes on the same chimney differ.
  • Masonry condition above the roofline. The desert sun is hard on mortar joints. Chimneys on older Tempe properties, especially in neighborhoods built before the 1990s, often show spalling brick and eroded mortar that has to be addressed before a new cap or liner is worth installing.
  • Cap and accessory specification. We source caps from Gelco, Famco and Olympia Chimney. A properly sized stainless cap costs more than a hardware-store cover, and it lasts longer because it’s engineered for the flue it sits on.
  • Whether the job needs a rebuild or a repair. A crown repair at $450 to $1,500 and a full above-roof rebuild at $4,500 to $9,500 are both legitimate answers to “my chimney looks bad.” The inspection is what separates them.

The dry Tempe climate has one specific effect worth naming: masonry dries out fast, so cracking from moisture cycling shows up differently than it does in wetter parts of the country. That means crown and mortar failures often appear as wide, open cracks rather than the slow crumble you’d see in a humid climate. Those cracks are what let water in during the monsoon season, and monsoon rain is the event that does real damage to an unprotected chimney top.

How to Save on Chimney Liner & Rebuild

The largest savings comes from catching the problem before it escalates. A $150 to $320 sweep plus an inspection is a fraction of a $6,800 reline, and it’s the difference between monitoring a hairline crack and discovering it after a monsoon has driven water into the masonry.

  • Get the inspection before you get quotes. A documented condition assessment tells you exactly what’s safe, what needs repair now and what can wait. It also prevents paying for repairs you don’t need.
  • Ask whether HeatShield applies to your flue. If it does, resurfacing at $1,600 to $3,100 can replace a full reline at $2,400 to $6,800. Not every flue qualifies, but the question is worth asking.
  • Bundle the cap with the liner work. If the liner is coming out anyway, adding a Gelco, Famco or Olympia Chimney cap during the same visit costs less than a separate trip.
  • Don’t defer the crown. Crown repair at $450 to $1,500 protects the masonry below it. Skip it and the same water intrusion turns into a $4,500 rebuild.
  • Keep annual maintenance going. A yearly sweep keeps creosote from reaching Stage 3 and gives you a running record of the chimney’s condition, which matters if you ever sell the house.

Estimates are free. Call (866) 827-7102 and we’ll get an inspection scheduled so you’re working from real numbers, not guesses.

Need a price for your chimney cleaning?Free estimate, price agreed before work starts
Call (866) 827-7102

Why an Inspection Comes First

A sweep cleans. It doesn’t tell you whether the flue lining is cracked, whether the crown has separated, or whether the mortar above the roofline is holding. Those are the findings that determine whether you’re spending $200 or $6,000, and they only come from an inspection with documentation.

That’s why our three services stay under one roof. The sweep uncovers a problem, the inspection documents it, and the repair gets quoted and completed by the same team that found it. No handoff, no second contractor, no re-explaining the chimney to someone who wasn’t there. If you want the fuller picture of how we approach chimney work across the city, start with Tempe Chimney Sweep and see how the service tiers fit together.

Liner Replacement vs. Rebuild: Which Do You Need?

These are different repairs and they solve different problems. A liner replacement addresses the interior flue: the tiles or liner that carry smoke and heat. A rebuild addresses the exterior masonry stack. Many chimneys need one or the other. Some need both.

  • Liner replacement is called for when flue tiles are cracked, spalled, offset or missing, or when a new appliance requires a correctly sized liner.
  • HeatShield resurfacing fits when tiles are cracked but the structure is intact and a full tearout isn’t justified.
  • Partial rebuild is right when the damage is limited to the crown, cap or upper few courses of brick.
  • Full above-roof rebuild is needed when the stack itself is failing, not just cosmetically but structurally.

FAQs – Chimney Liner & Rebuild Cost

How much does a chimney liner cost in Tempe?

A full chimney liner replacement in Tempe typically costs $2,400 to $6,800, with partial relining running $1,200 to $2,800. The final number depends on flue height, liner length and whether a cap and insulation are included. Call (866) 827-7102 for an exact quote based on your chimney, not a range.

Is it cheaper to resurface a flue or replace the liner?

Resurfacing is usually cheaper. HeatShield flue resurfacing typically runs $1,600 to $3,100 in Tempe versus $2,400 to $6,800 for a full reline. It only applies when the flue tiles are cracked but structurally sound, so the inspection decides which path is available to you. Call us and we’ll tell you which one your chimney qualifies for.

How much does a chimney rebuild cost in Tempe?

A partial above-roof rebuild runs $900 to $4,200, and a full above-roof rebuild runs $4,500 to $9,500. Crown repair alone is $450 to $1,500 and is often the right first step. Call (866) 827-7102 to get a written estimate before committing to either.

Can you come today?

Same-day service is often available. We answer 24/7, and dispatch runs 7am to 7pm, Sunday through Friday. A call outside those dispatch hours is booked into the next opening. Call (866) 827-7102 to check availability.

Do I need a permit for a chimney rebuild in Tempe?

Most cities require a permit for structural chimney work, so ask Tempe’s building department before work starts. Liner replacement and resurfacing sometimes fall under repair exemptions and sometimes don’t. We’ll tell you what the scope typically triggers during the estimate. Call (866) 827-7102 to schedule.

Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (866) 827-7102

How long does a liner replacement take?

Most full liner replacements take one day, and partial relines or HeatShield resurfacing often take a few hours. A rebuild takes longer, usually two to four days depending on the height of the stack and how much mortar has to be matched. The written estimate will state the expected timeline for your job.

What Happens When You Call

We start with a documented inspection. You get a clear report of what’s safe, what needs repair now and what can be monitored, plus a written estimate for whatever work is recommended. The brands involved are ones we source specifically for chimney work: DuraFlex for liner systems, HeatShield for flue resurfacing, and Gelco, Olympia Chimney and Famco for caps and accessories. Copperfield is also part of the portfolio for supporting components. Nothing here is an improvised hardware-store substitute.

Our technicians have up to 9 years of experience, and all three services (sweeping, inspection and repair) are handled by the same team. If you’re in Tempe, that means one relationship for the whole chimney, not three separate phone calls.

Contact Us for a Free Estimate

Call (866) 827-7102 for a free estimate on chimney liner replacement, resurfacing or rebuild work in Tempe. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. You’ll get a written estimate that sets the final price, and a clear picture of what your chimney actually needs.

Pricing reflects the Tempe market as of 2026. Tempe Chimney Sweep offers free estimates – call (866) 827-7102.

Written by the team at Tempe Chimney Sweep.

What Our Customers Say

★★★★★ 4.8 from 5+ reviews

"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."

- Brooke Meyer

"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."

- Greg Hayes

"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."

- Bethany Gallagher
Need Chimney Cleaning help in Tempe? Licensed & insured · free written estimates
Call (866) 827-7102

Request a Free Estimate

Tell us what's going on in Tempe. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - We Answer 24/7
Local Service Coverage
Call Now - We Answer 24/7